Saturday , April 4th 2020
    Wireless Devices for Home Network

Zooz Z-Wave Plus S2 MultiRelay ZEN16 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required

Product Features:

    NOTE: Check power first: DON'T exceed 15A for R1 and R2, or 20A for R3. Do NOT power this device with 110 V, always use a low-voltage power source (12-24 V or USB C).SPECIFICATIONS:Model Number: ZEN16Z-Wave Signal Frequency: 908.42 MHzPower: 12 - 24 V / USB CMaximum Load: Relay…
Price as on: 2020-02-13 23:48:21
36.95  

Product Description

    NOTE: Check power first: DON’T exceed 15A for R1 and R2, or 20A for R3. Do NOT power this device with 110 V, always use a low-voltage power source (12-24 V or USB C).

      SPECIFICATIONS:

    • Model Number: ZEN16
    • Z-Wave Signal Frequency: 908.42 MHz
    • Power: 12 – 24 V / USB C
    • Maximum Load: Relay 1: 15 A, Relay 2: 15 A, Relay 3: 20 A
    • Z-Wave Range: Up to 150 feet line of sight
    • Dimensions: 4″ x 2.5″ x 1.5″
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation and Use: Indoor only
    • Will it work with Alexa?
      Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to control this device with Alexa.
      Alexa-compatible Z-Wave hubs include:

    • SmartThings
    • Vera
    • Hubitat
    • Product Features

      • 3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control or use your Z-Wave hub (required, sold separately) for wireless control and automation. Alexa is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com. Custom handler required for SmartThings, go to Zooz support page for details.
      • VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
      • DIY INSTALLATION: Power it with a standard USB C cable and a power supply (do NOT use USB chargers) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V!
      • RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
      • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. It was tested to work well with Hubitat, Vera, openHAB, and on SmartThings with a custom device handler (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays).